Administrator's Guide

Station
Issue 5 October 2002 1157555-233-506
R Balance Network
Recall Rotary Digit
This field only appears if type is 500 or 2500.
Redirect Notification
Remote Office Phone
Valid entries Usage
y
Enter y to select the R Balance Capacitor network. In all other
cases except for those listed under
n, enter y.
n Enter n to select the standard resistor capacitor network. You
must complete this field if Off-Premise Station is
y. Enter n
when the station port circuit is connected to terminal
equipment (such as SLC carriers or impedance compensators)
optioned for 600-ohm input impedance and the distance to the
equipment from the system is less than 3,000 feet.
Valid entries Usage
y/n
Enter y to allow the user of a rotary phone to dial the
administered Recall Rotary Digit to receive recall dial tone.
This will enable this user to perform conference and transfer
operations.
You establish the Recall Rotary Digit on the Feature-Related
System Parameters screen.
Valid entries Usage
y/n
Enter y to give a half ring at this phone when calls to this
extension are redirected (via Call Forwarding or Call
Coverage).
Enter
y if LWC Reception is audix.
Valid entries Usage
y/n
Enter y to use this station as an endpoint in a remote office
configuration.