Administrator's Guide

System Parameters Call Coverage / Call Forwarding
Issue 5 October 2002 1171555-233-506
Maintain SBA At Principal
Allows a user to maintain a simulated bridged appearance when a call redirects to
coverage
.
QSIG VALU Coverage Overrides QSIG Diversion
with Rerouting
This field appears if, on the System-Parameters Customer-Options screen, the
Basic Supplementary Services and Supplementary Services with Rerouting fields
are
y.
This field specifies whether, with both QSIG Diversion with Rerouting and QSIG
VALU turned on, the Coverage After Forwarding option on the Station screen will
work for a user for calls that go to remote coverage. Normally, with QSIG
Diversion with Rerouting turned on, the local system passes control of a
forwarded call to the remote QSIG switch on which the forwarding destination
resides. In this case, the forwarded call cannot return to coverage for the user who
originally received the call, even when the remote destination is busy or does not
answer.
However, you can enter
y in this field to have QSIG VALU call coverage take
precedence. In this case, if the Coverage After Forwarding option on the Station
screen is enabled for a user, then QSIG Diversion with Rerouting is not be
attempted.
Valid entries Usage
y
Enter y to maintain a simulated bridged appearance (SBA) on
the principal’s phone when a call redirects to coverage. DCS
with rerouting will not be attempted after coverage.
n
When set to n, no SBA is maintained on the principal’s
phone. DCS with rerouting will be attempted, and if
successful, the principal will lose the bridged appearance and
the ability to bridge onto the coverage call.
Valid entries Usage
y/n
Enter y to allow Coverage After Forwarding to work when it
is activated on a user’s Station screen and Diversion with
Rerouting is also turned on.