Administrator's Guide

Managing phones
555-233-506120 Issue 5 October 2002
Adding remote office to Avaya MultiVantage
Solution
In our example, we’ll set up a remote office location using Avaya R300 Remote
Office Communicator hardware in our branch office in Santa Fe. We’ll add a new
node, and set up the signaling group and trunk group.
Adding a node
Instructions
To add the remote office node to MULTIVANTAGE:
1. Type change node-names IP and press RETURN.
The Node Name screen appears.
Screen 1. IP Node Names
2. In the Name field, type in a word to identify the node.
In our example, type
Remote 6.
3. In the IP address field, type in the IP address to match the one on the Avaya
R300 administration.
4. Press ENTER to save your changes.
change node-names ip Page 1 of 1
IP NODE NAMES
Name IP Address Name IP Address
default 0 .0 .0 .0 __________________ ___.___.___.___
remote office 1 134.23.107.22 __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___