Administrator's Guide

Time of Day Routing Plan
Issue 5 October 2002 1229555-233-506
Act Time
Specify the activation time of the coverage path administered in the next CVG
PATH field. Enter the information in 24-hour time format.
CVG Path
Enter the coverage path number.
Time of Day Coverage Table
A display-only field when the screen is accessed using an administration
command. Specifies the Time of Day Coverage Table number. Up to 999 can be
administered.
Time of Day Routing Plan
Use this screen to set up Time of Day Routing Plans. You can route AAR and
ARS calls based on the time of day each call is made. You can design up to 8 Time
of Day Routing Plans, each scheduled to change up to 6 times a day for each day
in the week.
Match the Time of Day Routing Plan PGN# with the PGN# field on the Partition
Routing Table for the route pattern you want to use.
NOTE:
Automatic Route Selection (ARS) or Private Networking, AAR/ARS
Partitioning, and Time of Day Routing must be enabled on the
Valid entries Usage
00:01
to
23:59
If there are time gaps in the table, there will be no coverage
path in effect during those periods. The first activation time
for a day is set to 00:00 and cannot be changed. Activation
times for a day must be in ascending order from left to right.
Valid entries Usage
1
through
9999 or blank
For the DEFINITY R configurations and S8700 IP-Connect
1 through 999 For the DEFINITY SI configurations