Administrator's Guide

Managing phones

555-233-506124 Issue 5 October 2002

Setting up remote office on network regions

Now we will set up a network region and show the connections between regions.

Instructions

Set up network region 1:

1. Type

add ip-network-region 1 and press ENTER.

The IP Network Region screen appears.

2. In the Name field, describe the region you are setting up.

3. In the Codec Set field, type the codec set you want to use in this region.

4. In the UDP Port Range, type the range of the UDP port number to be used

for audio transport.

5. In the Direct IP-IP Audio Connections field, type

6. Move to page 2 to set up connections between regions and assign codecs

for inter-region connections.

change ip-network-region 1 Page 1 of 2

IP Network Region

Region: 1

Name: Denver main

Audio Parameters Direct IP-IP Audio Connections? y

Codec Set: 4 IP Audio Hairpinning? y

Location: 1

UPD Port Range RTCP Enabled? y

Min: 2048_ RTCP Monitor Server Parameters

Max: 3028 Use Default Server Parameters? n

Server IP Address: 1 .2 .3 .4

DiffServ/TOS Parameters Server Port: 5005

Call Control PHB Value: 34_ RTCP Report Period(secs): 5

VoIP Media PHB Value: 46

BBE PHB Value: 43 Resource Reservation Parameters

RSVP Enabled? y

802.1p/Q Enabled? y RSVP Refresh Rate(secs): 15

Call Control 802.1p Priority: 7 Retry upon RSVP Failure Enabled? y

VoIP Media 802.1p Priority: 6 RSVP Profile: guaranteed-service

802.1Q VLAN: 0