Administrator's Guide

Screen reference
555-233-5061260 Issue 5 October 2002
TN
Tip:
Double-check your entry. If you accidentally enter an unassigned tenant
partition number, the system will accept the entry but no calls will go to the
trunk group.
Toll Restricted
Tip:
To find out what kind of line coding a trunk group member uses, check the
Line Coding field on the DS1 Circuit Pack screen for the DS1 port to which
the member is assigned.
Trunk Flash
Trunk Flash enables multifunction telephones located directly behind the
DEFINITY System to access central office customized services that are provided
by the far-end or Central Office (CO). These central office customized services
are electronic features, such as conference and transfer, that are accessed by a
sequence of flash signal and dial signals from the MultiVantage system telephone
on an active trunk call.
Valid entries Usage
1
to 20
(DEFINITY SI,
CSI)
Enter a Tenant Partition number to assign this trunk
group to the partition.
1 to 100
(DEFINITY R,
S8700
IP-Connect)
Valid entries Usage
y
Enter y to prevent toll-restricted users from using a trunk
access code to make restricted outgoing calls over this trunk
group.
n
Enter n if the field is automatic or if you don’t want to restrict
access.
Valid entries Usage
y/n
Enter y to allow trunk flash.