Administrator's Guide

Screen reference
555-233-5061268 Issue 5 October 2002
ACA Assignment
Charge Conversion
Avaya MultiVantage multiplies the number of charge units by the value of this
field and displays it as a currency amount. If there is no value in this field, Avaya
MultiVantage displays the number of charge units without converting it to
currency. This field appears for CO, DIOD, FX, and WATS trunk groups when the
Direction field is
outgoing or two-way. For ISDN trunk groups, it appears when
the Charge Advice field is not
none.
Charge Type
Entries in this field are text strings you use to describe charges related to a phone
call. This field appears for CO, DIOD, FX, and WATS trunk groups when the
Direction field is
outgoing or two-way. For ISDN trunk groups, it appears when
the Charge Advice field is not
none.
Connected to CO
This field appears when the Group Type field is tie.
Valid entries Usage
y/n
Enter y if you want Automatic Circuit Assurance (ACA)
measurements to be taken for this trunk group. If
y is entered,
complete the Long Holding Time, Short Holding Time, and
Short Holding Threshold fields.
Valid entries Usage
1
to 64,500 Enter the value of a charge unit in terms of the currency you
use.
Valid entries Usage
1–7
characters
(embedded
spaces count
as characters)
or blank
Enter the words or characters you want to appear on phone
displays after the charge amount. Most likely you will use
either the currency symbol or the charge type, bur not both.
Valid entries Usage
y/n
Enter y to allow overlap sending to a Central Office.