Administrator's Guide

Screen reference
555-233-5061272 Issue 5 October 2002
Network Call Redirection
For more information, see Avaya MultiVantage™ Network Call Redirection.
Outgoing ANI
If this trunk group is used for an outgoing call with ANI, the entry in this field
overrides the normal ANI. The ANI is sent exactly as administered, except for the
normal truncation to 7 digits for Russian ANI. This ANI override works both for
calls originated in Avaya MultiVantage and calls tandemed through it. This field
appears for CO, DIOD, FX, and WATS trunk groups.
Path Replacement Method
Appears when the following fields are set on the Trunk Group screen: trunk group
Type is
ISDN, Supplementary Service Protocol is b or e, the Path Replacement
with Retention is
n, and the Supplementary Services with Rerouting field or the
DCS with Rerouting field on the System Parameters Customer Options screen is
y.
Valid entries Usage
deflect
Use to allow Network Call Deflection.
ANSI-transfer
Use to allow Network Call Transfer for MCI DEX 600
ISDN trunks.
Nortel-transfer
Use to allow Network Call Transfer for MCI DMS 250
switches.
telcordia-tbct
Use to allow Network Call Transfer for Lucent 5ESS or
Nortel DMS100 switches.
Valid entries Usage
1 to 15 digits Enter the digit string to be sent in place of normal ANI.
blank Leave this field blank to allow ANI to work normally.
Valid entries Usage
always Use any QSIG (SSB) trunk group as the replacement trunk
group. A new call is always originated, even when the
original trunk group is determined to be the replacement
trunk group.
BR
(better route)
Route pattern preferences help determine trunk group path
replacement. The original trunk group is retained if the Path
Replacement with Retention field is
y. Path replacement fails
(and the original trunk group is retained) if the Path
Replacement with Retention field is
n.