Administrator's Guide

Trunk Group
Issue 5 October 2002 1273555-233-506
Path Replacement with Retention
Appears when the following fields are set on the Trunk Group screen: trunk group
Type is
ISDN, Supplementary Service Protocol is b or e, and the Supplementary
Services with Rerouting field or the DCS with Rerouting field on the System
Parameters Customer Options screen is
y.
PBX ID
Appears when the Used for DCS field is y. This field identifies the remote switch
in the network with which the trunk will communicate on a DCS signaling link.
Per Call CPN Blocking Code
For Access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.
Per Call CPN Unblocking Code
For access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.
Valid entries Usage
y/n
Enter y to retain the original trunk group. Set to n to allow
path replacement according to setting on the Path
Replacement Method field.
Valid entries Usage
1
to 63 or
blank
Enter the ID of the switch at the other end of this trunk.
Valid entries Usage
1 to 4 digit
number or
blank
*, #
May be used as the first digit
Valid entries Usage
1 to 4 digit number or
blank
*, #
May be used as the first digit