Administrator's Guide

Screen reference
555-233-5061274 Issue 5 October 2002
Receive Analog Incoming Call ID
Your switch stores and displays 15 characters of name and number information
associated with an incoming call on analog trunks (ICLID, or incoming call line
identification information). This field appears for CO, DID, and DIOD trunk
groups when the Analog Trunk Incoming Call ID field on the System-Parameters
Customer-Options screen is
y and the Direction field is incoming or two-way.
Request Category
This field appears when the Country field is 15 and the Shuttle field is y.
Seize When Maintenance Busy
This field only affects ports on TN760C (or later release), TN767, and TN464C
(or later release) circuit packs. It indicates whether this switch generates an
outgoing seizure when a trunk in this trunk group is maintenance busied and
whether the far-end switch is administered to do likewise. This supports the
Electronic Tandem Network Busyout feature, which is intended to prevent a
far-end switch from reporting problems with a trunk that has been removed from
service on your switch. This field’s setting does not affect the behavior of the
far-end switch; it controls the behavior of this switch and defines the expected
far-end behavior.
Valid
entries Usage
Bellcore
Used to collect ICLID information in the U.S.
NTT Used to collect ICLID information in Japan.
disabled
Stops the collection of ICLID information on analog trunks.
Valid entries Usage
y/n
Enter y if the switch should request a call category from the
central office.