Administrator's Guide

Screen reference
555-233-5061276 Issue 5 October 2002
Short Holding Time (seconds)
This field appears when the ACA Assignment field is y.
Shuttle
This field appears when the Group Type field is co, fx, or wats, the Country field
is
15, and the Outgoing Dial Type field is rotary. It can be administered on
TN464D (or later release) or TN2199 circuit packs.
Start B Signal
This field appears when the Country field is 15 and the Shuttle field is y. Enter
1–3 to indicate which B-signal should be used to start a call. The value
administered in this field must be coordinated with your central office. See ‘‘Start
Position’’ on page 1276.
Start Position
The value administered in this field must be coordinated with your central office.
This field appears when the Country field is
15 and the Shuttle field is y.
Valid entries Usage
0
to 160 Enter the length of time (in seconds) that the system
considers as being a short holding time. If
0 is entered, the
system will not consider short holding calls.
Valid entries Usage
y/n
Enter y to enable MF shuttle signaling.
Valid entries Usage
1
Start calls with signal B1 (first digit)
2
Start calls with signal B2 (next digit)
3
Start calls with signal B3 (previous digit)
Valid entries Usage
1
to 9 Indicate which digit in the digit string is considered to be the
“previously sent” digit (see ‘‘Start B Signal’’ on page 1276).