Administrator's Guide

Screen reference
555-233-5061278 Issue 5 October 2002
Screen 297. Administrable Timers for Trunk Group
!
CAUTION:
Customers: Do not change fields on this page without assistance from Avaya
or your network service provider.
Answer Send (msec)
This field appears only if the Trunk Type field is dis and the trunk group
Direction field is
incoming or two-way. Only TN2140 and TN2199 ports receive
this timer.
Busy Tone Disconnect
The field appears when Enable Busy Tone Disconnect for Analog loop-start
Trunks is
y on the System Parameters Country-Options screen.
Valid entries Usage
10
to 2550 in
increments of
10
Enter the duration of the answer signal pulse.
Valid entries Usage
y/n
Enter y to allow the switch to recognize a busy tone signal as a
disconnect on this trunk group.
add trunk-group next Page 3 of x
ADMINISTRABLE TIMERS
Send Incoming/Outgoing Disconnect Timers to TN465 Ports? _
Outgoing Dial Guard(msec): _____
Incoming Glare Guard(msec): _____ Outgoing Glare Guard(msec): _____
Outgoing Rotary Dial Interdigit (msec): ____
Ringing Monitor(msec): _____ Incoming Seizure(msec): ____
Outgoing End of Dial(sec): ___ Outgoing Seizure Response(sec): ___
Programmed Dial Pause(msec): _____ Disconnect Signal Error(sec): ___
Flash Length(msec): ____
Busy Tone Disconnect?
END TO END SIGNALING
Tone (msec): ____ Pause (msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 40 Break(msec): 60 PPM? y Frequency: 50/12k