Administrator's Guide

Trunk Group

Issue 5 October 2002 1299555-233-506

Ans Delay

CAUTION:

Customers should not attempt to administer this field. Please contact your

Avaya representative for assistance

This delay serves two purposes:

■ It ensures that the answer supervision signal is valid and not a secondary

delay-dial or wink-start signal.

■ It ignores momentary off-hook signals resulting from connections made

off-network through certain No. 5 Crossbar CCSA switches as the

connection is being established. Therefore, calls aren’t dropped

inappropriately.

Code

This display-only field shows the type of circuit pack physically installed or

logically administered at the location to which this member is assigned. If no

circuit pack is installed or administered at the port address you enter, the field is

blank.

Mode

This field specifies the signaling mode used on tie trunks with TN722A or later,

TN760B or later, TN767, TN464 (any suffix), TN437, TN439, TN458, or

TN2140 circuit packs. This entry must correspond to associated dip switch

settings on the circuit pack.

Valid entries Usage

to 5100 in

increments of

Specifies the length of time (in ms) your switch will wait

before it sends answer supervision for incoming calls on tie

trunks using the TN722A or later, TN760 (B, C, or D),

TN767, TN464 (any suffix), TN437, TN439, TN458, or

TN2140 circuit packs.

blank Same as setting the field to zero.