Administrator's Guide

Administration change notification
Issue 5 October 2002 1459555-233-506
■ System Measurements
Access endpoints are not measured. All other trunks in an AC are measured
as usual.
■ Terminal Dialing
Turn off terminal dialing for data modules involved in an AC. This
prevents display of call-processing messages (INCOMING CALL,...) on
the terminal.
■ Trunk Groups
To invoke auto restoration, route an AC over SDDN trunks. Because a
successful restoration depends on a SDDN path, keep some SDDN trunks
idle.
Administration change notification
You can use Administration Change Notification to notify adjunct systems when
MultiVantage administration data is changed. This is intended to keep a client
application running on an adjunct, such as Enterprise Directory Gateway, in sync
with changes in the switch.
You can request notification of any changes to MultiVantage administration by
entering the command
notify history from the client application. MultiVantage
will continue to send notification to the adjunct over the Operations Support
System Interface (OSSI) link until the command is cancelled.
Detailed description
Administration Change Notification tracks changes made via the System Access
Terminal (SAT), INADS port, Property Management System (PMS), Call
Management System (CMS), Avaya Site Administration (ASA), Avaya Network
Administration, or Avaya Directory Gateway. It also tracks any changes made
through a telephone interface, such as Terminal Translation Initialization (TTI),
Personal Station Access (PSA), and Terminal Self Administration.
The MultiVantage System only notifies the adjunct that a data object has been
changed, but does not provide details of the change. In order to obtain these
details, the adjunct must request this information from the switch over a separate
link.