Administrator's Guide

Features and technical reference
555-233-5061590 Issue 5 October 2002
Table 51. Condition codes
Condition
Codes Description
0 Identifies an intraswitch call (a call that originates and terminates on the
switch).
1 (A) Identifies an attendant-handled call or an attendant-assisted call (except
conference calls).
4 (D) Identifies an extremely long call (10 hours or more) or an extremely high
message count TSC (9999 messages or more). On a call exceeding 10 hours,
a call record with this condition code and a duration entry of 9 hours, 59
minutes, and 1–9 tenths of a minute is produced after the first period. A
similar call record with this condition code is produced after each succeeding
10-hour period. When the call does terminate, a final call record with a
different condition code identifying the call type is produced.
6 (E) Identifies calls that are not recorded because of resource exhaustion. A
record with this condition code is generated for calls that are routed to the
attendant or calls that require CDR to overwrite records. This also includes
ISDN calls that did not complete at the far end, for which the Q.931 message
included a cause value. It does not include ISDN calls that receive inband
tones.
The record includes the time and duration of the outage.
7 (G) Identifies calls served by the AAR or ARS Selection feature.
8 (H) Identifies calls which have been served on a delayed basis via the Ringback
Queuing feature.
9 (I) Identifies an incoming or tandem call, or an incoming or tandem NCA-TSC.
A Identifies an outgoing call.
B Identifies an adjunct-placed outgoing call.
C (L) Identifies a conference call. For trunk CDR, a separate call record with this
condition code is produced for each incoming or outgoing trunk serving the
conference connection. The only extension recorded for a conference call is
the conference call originator, provided ITCS and OTCS are disabled. For
intraswitch CDR, if the originator is optioned for intraswitch, each time the
originator dials a non-trunk party a separate call record is produced with this
condition code, provided ITCS is disabled. If the originator is not optioned
for intraswitch CDR, a separate record with this condition code is produced
for each intraswitch party dialed.
Continued on next page