Administrator's Guide

Features and technical reference
555-233-5061602 Issue 5 October 2002
■ AUDIX - Transfer out of
If Incoming Trunk Call Splitting is enabled, and Transfer out of AUDIX is
used, CDR generates two records. The first contains the AUDIX, the
second contains the transferred-to party.
■ Authorization Codes
Authorization codes are recorded on CDR records provided account codes
do not exceed 5 digits for non-ISDN and ISDN LSU formats, or 4 digits for
Enhanced LSU formats. On the 59-character CDR International Processing
and International Direct records, the authorization code is never recorded.
When account codes are dialed, for the non-ISDN and the ISDN LSU
formats, authorization codes are recorded on CDR printouts if the account
code length does not exceed 6 digits. For Enhanced LSU, the account code
length must not exceed 6 digits.
■ Automatic Selection of DID Numbers
Incoming calls, if recorded at all, are recorded for the DID extension
number, not the room extension number.
■ Automatic Alternate Routing (AAR) and ARS
CDR records contain the following information for ARS:
— Fact that an ARS call was made
— Calling extension number
— FRL of the calling extension
— Called number
— TAC of trunk group used for the ARS call
— Time of call completion
— Call duration (how long the parties talked)
— IXC code, if any
If CDR is suppressed for the trunk group actually used on an ARS call, a
CDR record is not generated; otherwise, Condition Code 7 applies. The
ARS access code is recorded in the Access Code Dialed field and the trunk
access code for the trunk group actually used is recorded in the Access
Code Used field.
If an AAR call is placed to a busy trunk group and CDR is suppressed for
that trunk group, the user hears reorder tone and the CDR output shows an
ineffective call attempt.