Administrator's Guide
Features and technical reference
555-233-5061652 Issue 5 October 2002
Restriction — controlled
Controlled Restrictions allow a telephone user with console permission to activate
or deactivate specific restrictions.
Detailed description
Use Controlled Restriction to administer the following restrictions:
■ Outward — The telephone cannot place calls to the public network.
■ Total — The telephone cannot place or receive calls. (Allowed calls
include calls to a remote-access extension, terminating-trunk transmission
tests, and Emergency Access to Attendant calls.)
Direct Inward Dialing (DID) calls are routed to the attendant or a recorded
announcement. All other calls receive intercept tone.
■ Termination — The telephone cannot receive any calls. Incoming calls are
routed to the attendant, are redirected via Call Coverage, or receive
intercept treatment.
■ Station-to-Station — The telephone cannot place or receive
station-to-station calls.
■ Toll — The telephone cannot place toll calls but can place free local calls.
NOTE:
Toll Restriction may be substituted for either the outward or
station-to-station restrictions. Administer this option on the
‘‘Feature-Related System Parameters’’ on page 795.
To activate Controlled Restriction:
1. Dial the group or extension feature access code.
2. Dial the number for the type of restriction desired:
— 1 for outward/toll
— 2 for total
— 3 for termination
— 4 for station-to-station/toll
3. Dial the extension (Attendant Control — Extension) or the Class of
Restriction (COR) for a group of telephones (Attendant Control — COR).