Administrator's Guide

Features and technical reference
555-233-5061674 Issue 5 October 2002
Detailed description
This feature does not change Call Coverage, nor does it change Call Forwarding
All Calls or the Call Forwarding Busy/Don’t Answer. It merely allows you to
select between one of two previously administered coverage paths or to change
your forwarding from any on-site or off-site location.
Telecommuting access extension
The telecommuting access extension allows you to use Extended User
Administration of Redirected Calls from off-site. If you want to quickly disable
the feature for all users, change the Telecommuting Access Extension to blank.
If you are operating in a DCS environment, you need to assign a different
telecommuting-access extension to each switch and tell your users which
extension they should use. You can use Extended User Administration of
Redirected Calls from any of the DCS nodes, but you need to dial the
telecommuting-access extension of the node on which your station is defined
before using the feature access code.
Extended User Administration of Redirected
Calls and COS
The following table shows the relationship between COS and a your ability to use
call forwarding at the your station without a security code or from any on-site or
off-site location with a security code.
Table 55. COS and Extended User Administration of Redirected Calls of Call
Forwarding
If the user’s COS are set to these values
Then the user’s call forwarding capability
is
Call
Fwd
All
COS
Call
Fwd
B/DA
COS
Extended
Call Fwd
Activate
All COS
Extended
Call Fwd
Activate
Busy D/A
COS
Users can
forward calls
from their station
without a
security code
Users can forward
calls from their
station or from
another location with
a security code
Yes Yes Yes Yes Yes Yes
No No Yes Yes No Yes
Yes Yes No No Yes No