Administrator's Guide

Telephone displays
Issue 5 October 2002 1837555-233-506
For example:
dialed digits
then
or, if no name is available
■ Call Purpose
This identifies the reason for an incoming call or a redirected call. (A
normal incoming call is not identified by a call purpose.) The following
identifiers sometimes appear on the display:
Display Meaning
b — (Busy) The called user is active on a call, and has a
temporary bridged appearance of the call.
c — (Cover All) The called user has Cover All assigned.
callback The call is an Automatic Callback call from the
system.
d — (Coverage on
Don’t Answer)
The call was redirected because the called phone was
not answered. Also indicates that the called user has
a temporary bridged appearance of the call.
f — (Call Forwarding) Another user has forwarded calls to this phone.
h — (Station hunt) The called user is active on a call and station hunt
was used to route the call.
ICOM The call is an Intercom call.
p — (Pickup) The user answered a Call Pickup group member’s
call.
park The user parked a call.
priority The call has priority status.
s — (Send All Calls) The called user is temporarily sending all calls to
coverage and the call has been redirected to this
phone.
a=3602
a=TOM BROWN 3062
a=EXT 3602 3062