Administrator's Guide

Setting up night service
Issue 5 October 2002 209555-233-506
Instructions
We will put the attendant console (attendant 2) in a night service mode.
To set up Night Console Service:
1. Type
change attendant 2 and press RETURN.
The Attendant Console screen appears.
2. In the Console Type field, type
principal.
There can be only one night-only or one day/night console in the system
unless you administer Tenant Partitioning. Night Service is activated from
the principal console or from the one station set per-system that has a
nite-serv button.
3. Press
ENTER to save your changes.
Setting up night station service
You can use night station service if you want to direct incoming trunks calls,
DID-LDN (direct inward dialing-listed directory number) calls, or internal calls to
the attendant (dialed ‘O’ calls) to a night service destination.
Let us say your attendant, who answers extension (LDN) 8100, usually goes home
at 6:00 p.m. When customers call extension 8100 after hours, you would like them
to hear an announcement that asks them to try their call again in the morning.
ATTENDANT CONSOLE 2
Type: console Name: 27 character attd cons name
Extension: 1000 Group: 1 Auto Answer: none
Console Type: principal TN: 1 Data Module? n
Port: 01C1106 COR: 1 Disp Client Redir? n
COS: 1 Display Language: english
DIRECT TRUNK GROUP SELECT BUTTON ASSIGNMENTS (Trunk Access Codes)
Local Remote Local Remote Local Remote
1: 9 5: 9:
2: 82 6: 10:
3: 7: 11:
4: 8: 12:
HUNDREDS SELECT BUTTON ASSIGNMENTS
1: 5: 9: 13: 17:
2: 6: 10: 14: 18:
3: 7: 11: 15: 19:
4: 8: 12: 16: 20: