Administrator's Guide

Assigning ARS FAC
Issue 5 October 2002 249555-233-506
Assigning ARS FAC
Be sure the ARS feature access code (FAC) is set up on your system. In the U.S.,
9 is usually the ARS FAC. Users dial 9 to make an outgoing call.
When a user dials 9 to access ARS and make an outgoing call, the ARS access
code 9 is dropped before digit analysis takes place. will not be part of the digit
analysis.
Instructions
To assign the ARS FAC:
1. Type
change dialplan and press ENTER.
The DCS to QSIG TSC Gateway screen screen appears.
2. Move to the 9 row and type
fac in the first column. Press ENTER to save
your changes.
3. Type
change features and press ENTER.
The Feature Access Code screen appears.
4. Type
9 in the ARS - access code field and press ENTER to save your
changes.
Displaying ARS analysis information
Instructions
You will want to become familiar with how your system currently routes outgoing
calls. To display the ARS Digit Analysis Table that controls how the system routes
calls that begin with 1:
1. Type
display ars analysis 1 and press RETURN.
The ARS Digit Analysis Table for dialed strings that begin with 1 appears.
Note that the switch displays only as many dialed strings as can fit on one
screen at a time.
To see all the dialed strings that are defined for your system, run an ARS Digit
Analysis report:
1. Type
list ars analysis and press RETURN.
The ARS Digit Analysis Report appears. You may want to print this report
to keep in your paper records.