Administrator's Guide

Routing outgoing calls
555-233-506262 Issue 5 October 2002
Instructions
We will add a new area code. When the California area code, 415, splits and
portions change to 650, you’ll need to add this new area code to your system.
Tip:
If you do not need to use 1 for area code calls, omit the 1 in steps 1, 3, and 5
in our example. Also, enter
10 in the Total Min and Total Max fields (instead
of 11) in step 6.
To add this non-local area code:
1. Type
list ars route-chosen 14152223333 and press RETURN.
You can use any 7-digit number after 1 and the old area code (415). We
used 222-3333.
The ARS Route Chosen Report screen appears.
2. Write down the Total Min, Total Max, Route Pattern, and Call Type values
from this screen.
In this example, the Total Min is
11, Total Max is 11, Route Pattern is 30,
and the Call Type is fnpa.
3. Type
change ars analysis 1650 and press RETURN.
The AAR and ARS Digit Analysis Table screen appears.
ARS ROUTE CHOSEN REPORT
Location: 1 Partitioned Group Number: 1
Dialed Total Route Call Node Location
String Min Max Pattern Type Number
141 11 11 30 fnpa all
ARS DIGIT ANALYSIS TABLE
Location: all Percent Full: 6
Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Req
1____________________11 11 30 fnpa ___ n
167__________________11 11 30 fnpa ___ n
1800_________________11 11 30 fnpa ___ n
2___________________ 7 7 2 hnpa ___ n
3___________________ 7 7 2 hnpa ___ n
4___________________ 7 7 2 hnpa ___ n
5___________________ 7 7 2 hnpa ___ n
7___________________ 7 7 2 hnpa ___ n
8___________________ 7 7 2 hnpa ___ n
911_________________ 3 3 1 emer ___ n
976________________ _11 11 deny hnpa ___ n