Administrator's Guide

Defining ARS Partitions

Issue 5 October 2002 265555-233-506

Instructions

We will create an authorization code 4395721with a COR of 2.

1. Type

change authorization-code 4395721 and press RETURN.

The Authorization Code — COR Mapping screen appears.

2. In the AC field, type

4395721.

3. In the COR field, enter

4. Press

ENTER to save your changes.

Defining ARS Partitions

Most companies want all their users to be able to make the same calls and follow

the same route patterns. However, you may find it helpful to provide special

calling permissions or restrictions to a group of users or to particular phones.

ARS partitioning allows you to provide different call routing for a group of users

or for specific phones.

NOTE:

If you used partitioning on a prior release of Avaya MultiVantage and you

want to continue to use partitioning, please read this section carefully. In this

release of Avaya MultiVantage, partition groups are defined on the Partition

Route Table. If you want to define routing based on partition groups, use the

Partition Route Table. Partition groups are no longer defined on the Digit

Analysis Table.

Before you start

Verify that the Tenant Partitioning field on the System Parameters Customer

Options screen is

Verify that the Time of Day Routing field on the System Parameters Customer

Options screen is

Authorization Code - COR Mapping

NOTE: 2 codes administered. Use ’list’ to display all codes.

AC COR AC COR AC COR AC COR AC COR AC COR

9260839 3 ________ __ ________ __ ________ __ ________ __ ________ __

2754609 4 ________ __ ________ __ ________ __ ________ __ ________ __

________ __ ________ __ ________ __ ________ __ ________ __ ________ __