Administrator's Guide

Defining ARS Partitions
Issue 5 October 2002 267555-233-506
4. Type change partition-route-table index 1 and press RETURN.
The Partition Route Table screen appears. In our example, partition group 1
can make 1800 calls and these calls use route pattern 30.
5. In the PGN2 column that corresponds to Route Index 1, type
30 and press
ENTER.
This tells the system to use route pattern 30 for partition group 2 and allow
partition group 2 members to make calls to 1800 numbers.
Assigning a phone to a partition group
To assign an extension to a partition group, first assign the partition group to a
COR, and then assign that COR to the extension.
Instructions
To assign a Class of Restriction (COR) to partition group 2:
1. Type
list cor and press RETURN.
The Class of Restriction Information screen appears.
2. Choose a COR that has not been used and press
CANCEL.
In our example, select
3.
Partition Routing Table
Routing Patterns
Route
Index PGN 1 PGN 2 PGN 3 PGN 4 PGN 5 PGN 6 PGN 7 PGN 8
----- ----- ----- ----- ----- ----- ----- ----- -----
1 __30 ____ ____ ____ ____ ____ ____ ____
2 ____ ____ ____ ____ ____ ____ ____ ____
3 ____ ____ ____ ____ ____ ____ ____ ____
4 ____ ____ ____ ____ ____ ____ ____ ____
5 ____ ____ ____ ____ ____ ____ ____ ____
6 ____ ____ ____ ____ ____ ____ ____ ____
7 ____ ____ ____ ____ ____ ____ ____ ____
CLASS OF RESTRICTION INFORMATION
COR COR Description
0
1 supervisor
2 telecommuting
3