Administrator's Guide

Setting up time of day routing
Issue 5 October 2002 269555-233-506
Before you start
AAR or ARS must be administered on your switch before you use Time of Day
Routing.
■ For AAR, verify that either the Private Networking field or the Uniform
Dialing Plan field is
y on the System-Parameters Customer-Options screen.
■ For ARS, verify that the ARS field is y and the Time of Day Routing field
is
y on the System-Parameters Customer-Options screen.
Instructions
As an example, we will allow our executives to make long distance calls during
business hours. Let us look at the Time of Day Routing Plan before we make any
changes.
To display your Time of Day Routing Plan:
1. Type
display time-of-day 1 and press RETURN.
The Time of Day Routing Plan 1 appears.
Make a note of the routing plan that is currently in effect. In our example,
this plan is for employees who can only make local calls.
You can see that in our example, two partition group numbers control time
of day routing. PGN 1 begins one minute after midnight (00:01) every day
of the week, and is used for after-business hours and all day Saturday and
Sunday. PGN 2 is assigned to office hours Monday through Friday, not
including noon (12:00) to 1:00 p.m. (13:00).
2. Press
CANCEL to clear the screen.
Page 1 of 1
TIME OF DAY ROUTING PLAN 1
Act PGN Act PGN Act PGN Act PGN Act PGN Act
Time # Time # Time # Time # Time # Time
Sun 00:01 1 __:__ _ __:__ _ __:__ _ __:__ _ __:__ _
Mon 00:01 1 08:__00 2 12:__00 1 13:__00 2 17:__00 1 __:__ _
Tue 00:01 1 08:__00 2 12:__00 1 13:__00 2 17:__00 1 __:__ _
Wed 00:01 1 08:__00 2 12:__00 1 13:__00 2 17:__00 1 __:__ _
Thu 00:01 1 08:__00 2 12:__00 1 13:__00 2 17:__00 1 __:__ _
Fri 00:01 1 08:__00 2 12:__00 1 13:__00 2 17:__00 1 __:__ _
Sat 00:01 1 __:__ _ __:__ _ __:__ _ __:__ _ __:__ _