Administrator's Guide

Managing multimedia calling
555-233-506314 Issue 5 October 2002
Administration commands
System-Parameters Customer-Options screen:
To enable the MMCH release 6.3 feature, you need to purchase a new license file.
System-Parameters Features screen:
The default bandwidth for MMCH calls is defined on the System-Parameters
Features screen shown below.
NOTE:
Originating a multimedia call with the mm-call button will originate a call
according to the Default Multimedia Parameters selected on the System
Parameters Features screen.
■ This default parameter will be either 2x56 or 2x64.
■ The bearer capability of the multimedia calls will either be 56K or
64K and the bandwidth will be 2B channels.
Data module screen
The H.320 DVC system should contain a BRI interface. You must connect this
BRI interface to a port on a TN556 BRI circuit pack and administer it as a BRI
data module.
■ You may administer the data endpoint type as 7500 (recommended) or
WCBRI.
■ The fields for multimedia are the same on either screen.
■ The administration for a Basic mode and an Enhanced mode data module
are exactly the same.