Administrator's Guide

Setting up telecommuting
555-233-506362 Issue 5 October 2002
Related topics
See ‘‘Training users’’ on page 373 for information on how to associate or
disassociate PSA.
Creating a station security code
Station Security Codes (‘‘SREPN’’) provide security to station users by
preventing other users from accessing functions associated with the user’s station.
Each station user can change their own SSC if they know the station’s current
settings.
You must create a system-wide SSC change feature access code (‘‘FAC’’) before
users can change their SSC. You must also provide users with their individual
SSC. A user cannot change a blank SSC.
Instructions
In our example, we set the station security code for a user.
To create a station security code:
1. Type
change feature-access-codes and press RETURN.
The Feature Access Code screen appears.
2. Type
#5 in the Station Security Code Change Access Code field and press
ENTER.
This sets the access codes for this features. The Command prompt appears.
3. Type
change system-parameters security and press RETURN.
The Security-Related System Parameters screen appears.
4. Type 4 in the Minimum Station Security Code Length field and press
ENTER.
This determines the minimum required length of the Station Security
Codes you enter on the Station screen. Longer codes are more secure. If
station security codes are used for external access to telecommuting
features, the minimum length should be 7 or 8.