Administrator's Guide

Setting up telecommuting
555-233-506368 Issue 5 October 2002
Installing home equipment
Avaya MultiVantage allows you to install equipment in your home so that you can
utilize system facilities from off-site.
Before you start
You need the following equipment:
■ MultiVantage extender remote module
■ DCP sets (office and home must match)
Configure a feature access code for associating your home number to your office
number. For information about configuring an associate feature access code, see
‘‘Setting up Personal Station Access’’ on page 360.
Instructions
Installing home equipment
To install your home equipment:
1. Plug the phone cord into the slot labeled line on the back of the module and
into the wall jack.
2. Plug the phone cord into the slot labeled port on the back of the module and
into the slot labeled line on the phone.
3. Plug the power cord into slot labeled power on the back of the module and
the wall socket.
The phone display Go Online appears.
4. Press 3 (Nxt).
The phone display Set Phone Number appears.
5. Press 2 (OK) to set the phone number.
6. Type
5551234 and press DROP.
This is the assigned analog phone number. In some areas, you may need to
include your area code (for example, 3035551234). The phone display Set
Phone Number appears.
7. Press 1(Prv).
This returns you to the Go Online phone display.