Administrator's Guide

Using access security gateway
Issue 5 October 2002 395555-233-506
Disabling Access Security Gateway
To temporarily disable ASG while users are on vacation or travel:
1. Type
change login xxxx and press RETURN, where xxxx is the
alphanumeric login ID.
The Login Administration screen appears.
2. On the Access Security Gateway Login Administration page (page 2), set
the Blocked field to
y.
Setting the Blocked field to
y does not remove the login from the system,
but temporarily disables the login.
3. Press
ENTER to save your changes.
NOTE:
A superuser can disable and restart access for another superuser.
Restarting Access Security Gateway
To restart temporarily disabled access security gateway access for login:
1. Type
change login xxxx and press RETURN, where xxxx is the
alphanumeric login ID.
The Login Administration screen appears.
2. On the Access Security Gateway Login Administration page (page 2), set
the Blocked field to
n.
3. Press
ENTER to save your changes.
LOGIN ADMINISTRATION
Password of Login Making Change:
LOGIN BEING ADMINISTERED
Login’s Name:xxxxxxx
Login Type:
Service Level:
Disable Following a Security Violation?
Access to INADS Port? _
LOGIN’S PASSWORD INFORMATION
Login’s Password:
Reenter Login’s Password:
Password Aging Cycle Length (Days):
LOGOFF NOTIFICATION
Facility Test Call Notification? y Acknowledgment Required? y
Remote Access Notification? y Acknowledgment Required? y
ACCESS SECURITY GATEWAY PARAMETERS
Access Security Gateway? n