Administrator's Guide

Changing login permissions
Issue 5 October 2002 397555-233-506
■ Port — Contains the port mnemonic associated with the port on which the
session was established or rejected. The port mnemonics for G3r systems
are SYSAM-LCL, SYSAM-RMT, MAINT, and SYS-PORT. For G3si
systems, they are MRG1, INADS, NET, and EPN.
■ Login — Contains the alphanumeric login string entered by the user and
associated with the session establishment or rejection.
■ Status — Contains a code that indicates whether the session was
established or rejected and, if rejected, the reason for the rejection. See
Access Security Gateway for a list of the possible status values.
Related topics
‘‘Logging in with Access Security Gateway’’ on page 37
‘‘Security violations notification’’ on page 1813
Changing login permissions
This section shows you how to change login permissions.
Once you have created a login, you can modify the permissions associated with
the login. The system maintains default permissions for each level of login, but
you may want to further restrict the login, or at least make sure the defaults are
appropriate for the user. The default values for these fields vary based on the login
type.
Instructions
We will change the login permissions of angi3.
To change login permissions:
1. Type
change permissions angi3 and press RETURN.