Administrator's Guide

Restoring announcements
Issue 5 October 2002 447555-233-506
Instructions
We will copy the announcements stored in our weekly disk back-up to the tape
back-up we take off company premises for a month. To copy announcements
between your back-up disk and tape:
1. Type
copy announcements and press RETURN to save the changes.
This process can take up to 40 minutes. You cannot administer your system
while it is copying announcements.
Restoring announcements
NOTE:
This task only applies if you are using a TN750-series announcement circuit
pack.
If you are using the TN2501AP (VAL) announcement circuit pack or VVAL
announcements, see ‘‘Moving announcements to a VAL circuit pack or to
another LAN device’’ on page 463.
If you are using the ISSPA announcements capability of the S8100 Media
Server, see ‘‘Backup via the Web interface (S8100 Media Server only)’’ on
page 58.
You can restore announcements from system memory to an announcement circuit
pack. Your system memory is a tape, disk, or memory card, depending on your
system.
If you have a duplicated system, you system always restores the announcements
located on the active processor.
Instructions
We will restore announcements from our system memory (stored on a disk) to the
integrated announcement circuit pack on our system.
To restore announcements from system memory to the integrated announcement
circuit pack:
1. Type
restore announcements disk and press RETURN.