Administrator's Guide

Managing announcements
555-233-506458 Issue 5 October 2002
Deleting individual VAL announcement files
using the SAT
To delete the announcement named Closed (announcement #3 on Screen 13):
1. At the SAT, type
remove file board board-location
/annc/
filename.wav and press RETURN.
For example, to delete announcement #3 in Screen 13, type:
remove file board 01A11 /annc/Closed.wav
NOTE:
Filenames are case-sensitive and require the .wav file extension.
The /annc portion of the command directs the system to the
announcement subdirectory on the VAL circuit pack, and
/Closed.wav indicates to delete the filename Closed.wav.
Deleting all VAL announcements on a circuit
pack using the SAT
To delete all of the announcement files on the VAL circuit pack:
1. At the SAT, type
busyout board board-location and press RETURN.
Ensure that the command is successful.
NOTE:
When the VAL board is busied out,
■ both the RSCL and ethernet ports are busied out.
■ firmware takes down the ethernet link.
■ FTP is disabled because the ethernet link is down.
■ announcements on that circuit pack cannot play.
2. At the SAT, type
erase announcements board board-location and press
RETURN.
!
CAUTION:
This command deletes the specified announcement file in both RAM
and FLASH memory. The board firmware ignores the protect flag
(Pro field) when erasing the announcement files.
3. At the SAT, type
list directory board and press RETURN.