Administrator's Guide

Managing data calls
555-233-506536 Issue 5 October 2002
Make sure the PROCR is administered and its Ethernet port is enabled. If
the PROCR is not listed (PROCR should appear in the Type field and the
previously administered node name should appear in the Node Name
field), add a PROCR.
For S8300 Media Server
Although the S8300 Media Server does not use a standard DEFINITY server port
board, the pre-administration is the same.
1. Type
display system-parameters customer-options and press ENTER.
2. Go to page 2 and make sure the ASAI Link Core Capabilities and/or
Computer Telephony Adjunct Links fields are y, and the Co-Res
DEFINITY LAN Gateway field is
y.
3. Go to page 4 and make sure that the Processor Ethernet field is
y.
4. Type
display ip-interfaces and press ENTER.
Make sure the PROCR is administered and its Ethernet port is enabled. If
the PROCR is not listed (PROCR should appear in the Service Type field
and the previously administered node name should appear in the Node
Name field), add a PROCR.
Administering CTI Links - Summary
Use this information to familiarize yourself with the basic administrative tasks for
administering CTI links using the Co-Resident DLG.
■ Use the display system-parameters customer-options command make
sure the following fields are set to
y.
— ASAI Link Core Capabilities and/or Computer Telephony Adjunct
Links
— Co-Res DEFINITY LAN Gateway
■ Use the add cti-link command to administer a CTI link.
■ Use the change ip-services command and in the Service Type field, enter
DLG.
When the Service Type field is
DLG, the system adds a DLG
Administration page as the last page of the screen.
— Complete the DLG Administration page to add your client
information.
NOTE:
For additional information on DLG administration for the S8300 Media
Server, see “Avaya MultiVantage™ CallVisor® ASAI Technical Reference.”