Administrator's Guide

Administering Media Servers
555-233-506554 Issue 5 October 2002
Accessing Device Manager from a web browser
(For S8300 and S8700 Media Servers) To access the P330 Device Manager from a
web browser:
1. Open a compatible web browser on your computer. Microsoft Internet
Explorer 5.0 (or higher) and Netscape Navigator 4.7 and 6.2 are supported.
The Java Plug-in 1.3.1_02 is required.
2. In the Address (or Location) field of your browser, type the IP address of
the P330 stack.
3. Log in as prompted.
■ The default user name is: root
■ The default password for read-write access is: root
NOTE:
You should change the default passwords after you log in, if they
have not already been changed. The passwords apply to all logins for
these devices, whether accessed through Device Manager or a CLI.
4. The Welcome Page is displayed. Proceed with P330 and media gateway
device administration.
Accessing Device Manager through
MultiService Network Manager
(For S8300 and S8700 Media Servers) You can alternatively launch the P330
Device Manager from the Avaya MultiService (formerly P330View) Network
Manager. This optional product is a complete Network Management System
(NMS). Services include:
■ viewing all network devices by type, subnet, or customized groupings
■ logging and viewing SNMP traps and events
■ launching and managing other applications including Avaya™ Site
Administration
Contact your Avaya representative to obtain a copy of this program if desired.
Command line interface administration
(For S8300 and S8700 Media Servers) Instead of using Device Manager, you
could telnet into the Media Gateway Processor (MGP), or use the serial interface
on the front of the chassis to establish a direct connection to the P330 stack
processor.