Administrator's Guide

Call-processing administration
Issue 5 October 2002 563555-233-506
■ The IP Network Region screen also must be administered for QoS
monitoring (see Administration for Network Connectivity for Avaya
MultiVantage™ Software for details). If the
RTCP Enabled field is left at
default (“
y”), then be sure to set a valid IP address in the IP-Options
System Parameters screen. For situations that require customization, this
screen is administered on a per IP network regional basis. Items to
customize include:
■ Enabling or disabling of RTCP monitoring
■ Modifications to the report flow rate
■ Changes to the server IP address and server port
■ The list ip-network-region qos and list ip-network-region monitor
commands list quality of service and monitor server parameters from the IP
Network Region screen as follows:
■ qos displays VoIP media and call control (and their 802.1p priority
values), BBE DiffServ PHB values, RSVP profile and refresh rate.
■ monitor displays RTCP monitor server IP address, port number,
report flowrate, codec set, and UDP port range parameters.
Media Gateway serviceability commands
(For S8300 and S8700 Media Servers) Additional commands related to media
gateways appear in Maintenance for S8700 Media Server for Multiconnect
Configurations and Maintenance for S8700 Media Server for IP-connect
Configurations.These include:
■ The status media-gateways command provides an alarm summary,
busyout summary, and link summary of all configured media gateways.
■ Several commands have been modified to support the media gateway port
identification format described in ‘‘Command syntax changes for media
modules’’. These include:
■ Message Sequence Trace (mst)
■ display errors
■ display alarms