Administrator's Guide

SNMP Agents

Issue 5 October 2002 565555-233-506

The Add Trap Destination page displays.

Screen 29. Add Trap Destination screen, upper portion

3. In the Fill-in IP address and provide data for one of the three SNMP

versions section, check the

Check to enable this destination box.

4. In the

IP address field, enter the IP address for destination.

NOTE:

To use MultiVantage Fault Performance Management (MFPM), use

SNMP Version 1.

5. In the SNMP version 1 section, in the

Community name field, type public

if you are using MFPM. If you do not use MFPM, you can enter anything

but it has to be coordinated with the receiving network management

station.

6. Press

ADD to save your changes.

7. If you go back to check what the information looks like, under SNMP, click

Configure Trap Destinations.