Administrator's Guide

SNMP Agents
Issue 5 October 2002 573555-233-506
Screen 34. Administer SNMP Agents, lower portion
2. In the MultiVantage Management Sub-Agent section, check the Check to
enable MultiVantage Management Sub-Agent
box.
3. If checked, an SNMP manager can interact with the ACP application using
the MultiVantage sub-agent within the restrictions administered on this
screen.
4. If not checked, SNMP access to the ACP application is denied. Disabling
the MultiVantage sub-agent does not inhibit access to other SNMP agents
running on the server.
5. If you check the
Check to enable busy-out / release box, the
MultiVantage sub-agent can be used to busyout and release boards, ports,
trunk groups, and trunk members.
6. In the
Change Agent ACP Login Password field, enter a new
password to change the password the MultiVantage sub-agent uses to log in
to the call processing software.
7. In the
Verify New Agent ACP Login Password field, repeat the new
password.