Administrator's Guide

AAR and ARS Digit Analysis Table
Issue 5 October 2002 581555-233-506
Max
Min
Node Number
Percent Full
Displays the percentage (0 to 100) of the system’s memory resources that have
been used by AAR/ARS. If the figure is close to 100%, you can free up memory
resources.
Route Pattern
Enter the route number you want the switch to use for this dialed string.
Valid entries Usage
Between Min and
28
Enter the maximum number of user-dialed digits the
system collects to match to the dialed string.
Valid entries Usage
Between 1 and
Max
Enter the minimum number of user-dialed digits the
system collects to match to the dialed string.
Valid entries Usage
1
to 999 or blank Enter the number of the destination node in a private
network if you are using node number routing or DCS.
If you complete this field, leave the Route Index field
blank.
Valid entries Usage
p1
to p2000 Specifies the route index number established on the Partition
Routing Table
1 to 640 Specifies the route pattern used to route the call.
1 to 999 Specifies the route pattern used to route the call. For S8300
Media Server only.
r1 to r32 Specifies the remote home numbering plan area table.
Complete this field if RHNPA translations are required for
the corresponding dialed string.
node
Designates node number routing
deny
Blocks the call