Administrator's Guide

Access Endpoint
Issue 5 October 2002 593555-233-506
DIAL CODE
Enter the number you want to assign to each dial code (button). Any additions or
changes apply to all 7103A fixed feature phones. While the system is waiting, a
call progress tone receiver is tied up, and, since there are a limited number of
receivers in the system, outgoing calling capability may be impaired.
Vector Directory Number extension may also be assigned.
Access Endpoint
This screen administers Access Endpoints and Wideband Access endpoints.
NOTE:
You can administer Wideband Access Endpoints only if, on the
System-Parameters Customer-Options screen, the Wideband Switching field
is
y.
An Access Endpoint is a nonsignaling trunk that neither responds to signaling nor
generates signaling. Access Endpoints eliminate the need to dedicate an entire
trunk group for the access of a single trunk by providing the capability to assign
an extension number to a single trunk.
An Access Endpoint can be specified as the Originator or Destination endpoint of
an administered connection.
A Wideband Access Endpoint (WAE) is an endpoint application connected to
line-side non-ISDN T1 or E1 facilities and, like Access Endpoints, have no
signaling interface with the system. For information on endpoint applications
connected to line-side ISDN-PRI facilities, see ‘‘PRI Endpoint’’ on page 1080.
Valid entries Usage
Digits 0 to 9 Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~p
Pause 1.5 seconds
~w
Wait for dial tone
~m
Mark
~s
Start suppressing display of the digits being outpulsed
~W
Wait indefinitely for dial tone. Use this only if network
response time is more than 30 seconds. Not available for
S8300 Media Server.