Administrator's Guide

Call Vector
Issue 5 October 2002 643555-233-506
Meet-me Conf
This field appears only if, on the System-Parameters Customer-Options screen,
the Enhanced Conferencing field is
y. This field designates the VDN as a
Meet-me Conference VDN.
Multimedia
Indicates whether the vector should receive early answer treatment for multimedia
calls. This only applies if the Multimedia Call Handling field is
y. This field does
not appear for S8700 IP-Connect.
Name
Represents the vector name.
Number
A display-only field when the screen is accessed using a change or display
administration command.
Valid entries Usage
y/n
Enter y to enable Meet-me Conference for this vector. If
Meet-me Conference is
y, the Lock field also must be y.
When the Lock field is
y, the vector cannot be changed by
adjunct vectoring programs such as Visual Vectors.
Attendant Vectoring and Meet-me Conference cannot be
enabled at the same time.
Valid
entries Usage
y/n
If you expect this vector to receive multimedia calls, set this
field to
y. If this value is y, the call is considered to be
answered at the start of vector processing, and billing for the
call starts at that time. See ‘‘Managing multimedia calling’’
on page 275 for more information.
Valid entries Usage
Up to 27 alphanumeric characters.
Up to 15 alphanumeric characters
(for S8300 Media Server, S8700
IP-Connect only)
This is an optional field.
If ~r can be used to activate Network
Call Redirection if, on the
System-Parameters
Customer-Options screen, the ISDN
Network Call Redirection field is
y.