Administrator's Guide

CDR System Parameters
Issue 5 October 2002 653555-233-506
Record Called Vector Directory Number Instead
of Group or Member
If this option is enabled, the called VDN overrides the group or member
information that normally appears in the Dialed Number Field of the CDR record.
If a call is directed through more than one VDN, the first VDN used for the call is
stored. This applies only to calls routed to a hunt group by a vector, not to calls
routed directly to an extension by a vector.
You cannot use both the Called VDN and the Agent Login ID Instead of Group or
Member. Only one of these fields can be
y.
Record Non-Call-Assoc TSC
A temporary signaling channel (TSC) is a virtual connection established within an
ISDN D-channel. For more information, see the DEFINITY® Communications
System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference.
Record Outgoing Calls Only
Remove # From Called Number
Valid entries Usage
y/n
Enter y to include the Vector Directory Number (VDN) in
the Dialed Number Field of a CDR record.
Valid entries Usage
y/n
Enter y to create records for non-call-associated temporary
signaling connections. If you have a lot of data connections
this could increase the number of records. You may want to
consider the capacity of your record collection device.
Valid entries Usage
y
Enter y to record only outgoing calls. This can save space
if you are only concerned with charges for outbound calls.
n Enter n to record both outgoing and incoming calls.
Valid entries Usage
y
Enter y to have the “#” (or “E”) symbol removed from the
Dialed Number field of the call detail record. You might
need to verify that your output device can accept this format.
n Enter n to have the trailing “#” (or “E”) symbol appear in
the Dialed Number field whenever inter-digit time out
occurs or users dial # to indicate the end of dialing.