Administrator's Guide

Data modules
Issue 5 October 2002 711555-233-506
Endpoint Type
Used with X.25 Data Modules. An endpoint type is a type of packet switched data
endpoint that uses X.25 call control procedures. The X.25 Endpoint connects to
external ports on the PGATE board and to the TDM bus via a DS1 trunk. Ports
connected to the adjunct endpoint can be either DTEs or DCEs. The type of
endpoint (DTE or DCE) is administrable on the “data-mod” screen.
Error Logging
Used with X.25 Data Modules.
Establish Connection
Used with X.25, Point-to-Point, and Processor Interface (used with DEFINITY
CSI and SI only) data modules. See Administration for Network Connectivity for
Avaya MultiVantage™ Software for more information.
Highest PVC Logical Channel
A display-only field used with X.25 Data Modules. Appears when the Permanent
Virtual Circuit field is
y. Specifies how the above endpoint type acts.
IP Address Negotiation
Used with Point-to-Point data modules. Does not appear for S8700 IP-Connect.
See Administration for Network Connectivity for Avaya MultiVantage™ Software
for more information.
Valid entries Usage
adjunct
Mandatory entry
Valid entries Usage
y/n
Enter y to record X.25 protocol errors in the hardware error
log. See the Maintenance for Avaya™ MultiVantage and
DEFINITY® Server for more information about error logs.
Valid entries Usage
1
through 64
Indicates that 1 to 64 Logical Channels are allowed on this
port.