Administrator's Guide

Screen reference
555-233-506712 Issue 5 October 2002
ITC
(Information Transfer Capability) Used with 7500, Announcement, data-line,
Netcon, Processor/Trunk (
pdm selection), Processor Interface, and System Port
Data Modules. Appears only when, on the Trunk Group screen, the Comm Type
field is
56k-data or 64k-data. Indicates type of transmission facilities to be used
for ISDN calls originated from this endpoint. Does not display for voice-only or
BRI stations.
Link
Used with X.25, Ethernet, Point-to-Point, and Processor Interface (used with
DEFINITYCSI and SI only) data modules. See Administration for Network
Connectivity for Avaya MultiVantage™ Software for more information. This field
is in different locations on the screen for different data module types.
Maintenance Extension
Used with Netcon and Processor Interface Data Modules.
Valid entries Usage
restricted
Either restricted or unrestricted transmission facilities are
used to complete the call. A restricted facility is a
transmission facility that enforces 1’s density digital
transmission (that is, a sequence of 8 digital zeros are
converted to a sequence of 7 zeros and a digital 1).
unrestricted
Only unrestricted transmission facilities are used to complete
the call. An unrestricted facility is a transmission facility that
does not enforce 1’s density digital transmission (that is,
digital information is sent exactly as is).
Valid entries Usage
1-99
Enter a communication interface link number.
Valid entries Usage
Enter the extension number required to
perform maintenance functions on the
standby netcon physical channel in a
duplicated system.
The standby remote loop around
tests fails if this field is not
administered.