Administrator's Guide

Data modules
Issue 5 October 2002 715555-233-506
Port
Used with 7500, Data Line, Ethernet, Processor/Trunk, PPP, System Port, X.25,
and World Class BRI Data Modules. Specifies a port location to which the data
module is connected.
NOTE:
You can enter X in the Port field to indicate that there is no hardware
associated with the port assignment (also known as administration
without hardware). These stations are referred to as “phantom
stations.” If this data module is designated as a secondary data
module (Secondary data module set to
y) X cannot be entered into
this field. The port of a primary data module cannot be changed to X
if a secondary data module is administered.
Characters Meaning Value
1-2 Cabinet Number 01 through 44 (DEFINITY R
configurations)
01 through 03 (DEFINITY SI
configurations)
01 through 64 (S8700 IP-Connect)
3 Carrier A through E
4-5 Slot Number 0 through 20
6-7 Circuit Number 01 through 04 (x.25 circuit pack)
01 through 31 (DEFINITY SI, S8700
IP-Connect (tdm, pdm)
configurations)
01 through 16 (ppp for S8700
IP-Connect)
01 through 08 (system-port for S8700
IP-Connect)
17/33 (ethernet on S8700 IP-Connect)