Administrator's Guide

Screen reference
555-233-506754 Issue 5 October 2002
Local Node Number
Enter a number to identify a specific node in a switch network. This entry must
match the DCS switch node number and the CDR node number if they are
specified.
UDP Extension Search Order
Appears if, on the System-Parameters Customer-Options screen, the Uniform
Dialing Plan field is
y. Specifies the first table to search to match a dialed
extension. If the dialed extension is not found in the specified place, it then is
searched for in the “other” place.
Digit Absorption
This screen implements up to 5 digit absorption lists. The screen may be required
for each CO and FX trunk group connected to a step-by-step CO. Each outgoing
digit string from the switch to the step-by-step CO is treated according to entries
in the “Absorption Treatment Assignment” section of the screen.
NOTE:
If the Digits field on the Trunk Group screen is blank, you cannot administer
Digit Absorption.
Valid entries Usage
1
–63 Enter the number of a specific node in a network.
blank The field may be left blank if automatic restoration, DCS,
and CDR are not used.
Valid entries Usage
local-extensions-first
Searches the local Dial Plan first to match a dialed
extension; if not found, then uses the UDP tables
to route the call.
udp-table-first
Searches the UDP tables for an off-switch
conversion; if not found, then searches the local
server for the dialed extension.