Administrator's Guide

Screen reference
555-233-506768 Issue 5 October 2002
!
WARNING:
The AT&T Switched Network Protocol does not support restricted displays
of connected numbers. Therefore, if you administer the 1a
country-protocol/protocol-version combination on the DS1 screen, you
cannot set the Send Connected Number field to
r (restricted) on the
ISDN-PRI Trunk Group screen, as this causes display problems.
Public network signaling administration for ISDN-PRI Layer 3
The table below shows Avaya MultiVantage public network access connections
for ISDN-PRI Layer 3.
Admin
value Country Protocol supported
B-channel
mtce msg
1-a United States,
Canada
AT&T TR 41449/ 41459 (tested with
AT&T network, Canadian network, and
MCI network)
Service
1-b United States Bellcore TR 1268;
NIUF.302; ANSI T1.607
Restart
1-c United States NORTEL DMS-250 BCS36/IEC01 Service
1-d United States Telecordia SR-4287 Service
2-a Australia AUSTEL TS014.1;
Telecom Australia TPH 1856 National
ISDN protocol
Restart
2-b Australia ETSI ISDN protocol Restart
3 Japan NTT INS-NET Restart
4 Italy ETS 300 102 Restart
5 Netherlands ETS 300 102 Restart
6 Singapore ETS 300 102 Restart
7 Mexico ETS 300 102 Restart
8 Belgium ETS 300 102 Restart
9 Saudi Arabia ETS 300 102 Restart
10-a United
Kingdom
ETS 300 102 (for connection to DASS
II/DPNSS through external converter)
Restart
Continued on next page