Administrator's Guide

Screen reference

555-233-506772 Issue 5 October 2002

Side

This field controls how your switch resolves glare at layer 3 over an ISDN-PRI

link in QSIG private networks. It appears if the Interface field is

peer-master or

peer-slave.

The default value of the field changes depending upon which value the Interface

field contains.

CAUTION:

It is critical that administration on this switch correctly pairs with the

administration of the far-end switch. If the far-end is administered as the b

side, this field should be set to a regardless of whether the layer 2

designation is peer-master or peer-slave, and vice versa.

23 Brazil NA NA NA

24 Nordic NA NA NA

25 South Africa 160 240 0, 1

Valid entries Usage

Enter a if the Interface field is peer-master (this

switch overrides the far-end when glare occurs).

Enter b if the Interface field is peer-slave (this

switch releases the contested circuit and looks for

another when glare occurs).

Table 14. Incoming digital PPM signaling default (per Country Protocol

code) (Continued)

Code Country PPM Min (ms) PPM Max (ms) PPM Value

Continued on next page