Administrator's Guide

Feature-Related System Parameters
Issue 5 October 2002 797555-233-506
ACA Referral Calls
Indicates where ACA referral calls generate. This field only appears when the
Automatic Circuit Assurance (ACA) Enabled field is
y.)
ACA Referral Destination
The specified extension should be equipped with a display module. This field only
appears if ACA Referral Calls is
local or primary.
ACA Remote PBX Identification
This field only appears if ACA Referral Calls is remote.
ACA Short Holding Time Originating Extension
and ACA Long Holding Time Originating
Extension
Valid entries Usage
local
Local referral calls generate on and for the local switch.
primary
Primary referral calls generate on the local switch for remote
switches as well as the local switch.
remote
Remote referral calls generate at another switch in a DCS
network. In this case, the remote node number must also be
entered. The remote node number is the same node number
as defined on the Dial Plan screen. Also, ACA button status
transmits to other switches when in a DCS network.
Valid entries Usage
An extension Enter the extension on the local switch that is to receive the
ACA referral call.
attd
Enter attd for attendant.
Valid entries Usage
1
–63 Enter a number to identify the switch in a DCS network that
makes the referral call. Do not define the remote switch
identified in this field as
local on the system’s Dial Plan
screen.
Valid entries Usage
An unassigned
extension
Do not use the same extension number for both fields. The
specified extensions are assigned automatically by the
system when the screen is submitted. These fields only
display if ACA Referral Calls is
local or primary.