Administrator's Guide

Introduction to the MultiVantage system
555-233-50680 Issue 5 October 2002
Setting up Music-on-Hold
Music-on-Hold automatically provides music to a caller placed on hold. Providing
music lets the caller know that the connection is still active. The system does not
provide music to callers in a multiple-party connection who are in queue, on hold,
or parked.
Before you start
You need to determine the music source you will use, and obtain the necessary
circuit pack. Refer to AVAYA MultiVantage Hardware Solutions Guide for
more information about required hardware.
NOTE:
If you use equipment that rebroadcasts music or other copyrighted materials,
you may be required to obtain a copyright license from or pay fees to a third
party such as the American Society of Composers, Artists, and Producers
(ASCAP) or Broadcast Music Incorporated (BMI).
Instructions
In this example, we administer the system to allow local callers and incoming
trunk callers to hear music while on hold. Note that if you use Tenant Partitioning,
you cannot set up Music on Hold this way. See ‘‘Providing service for multiple
tenants’’ on page 82 for more information.
1. Type
change system-parameters features and press RETURN.
The Feature-Related System Parameters screen appears.
change system-parameters features Page 1 of 9
FEATURE-RELATED SYSTEM PARAMETERS
Trunk-to-Trunk Transfer? none
Automatic Callback - No Answer Timeout Interval (rings): 4_
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20_
AAR/ARS Dial Tone Required? y
Music/Tone On Hold: music Port: _______
Music (or Silence) On Transferred Trunk Calls: all
DID/Tie/ISDN Intercept Treatment: attd
Messaging Service Adjunct (MSA) Connected? y
Internal Auto-Answer of Attd-Extended/Transferred Calls: y
Automatic Circuit Assurance (ACA) Enabled? y
ACA Referral Calls: local
ACA Referral Destination: ________
ACA Short Holding Time Originating Extension: ______
ACA Long Holding Time Originating Extension: ______
Abbreviated Dial Programming by Assigned Lists:
Auto Abbreviated/Delayed Transition Interval(rings):