Administrator's Guide

Screen reference
555-233-506824 Issue 5 October 2002
Mode Code Interface
NOTE:
If you make a change to this field, you must log off and log back on to effect
the permission changes to get to the ‘‘Mode Code Related System
Parameters’’ on page 1034.
Allows you to use the Mode Code Voice Mail System Interface to connect the
switch over a DTMF interface to I
NTUITY AUDIX or other vendors’ voice mail
systems.
Night Service Disconnect Timer (seconds)
Enter a number or blank to indicate how long a trunk call can be unanswered
during night service before being disconnected. The trunk must not have
Disconnect Supervision for this timer to apply.
Public Network Trunks on Conference Call
Indicates the number of public network trunks allowed on a conference call.
Reset Shift Timer (seconds)
Used only for station-to-station calls or private network calls using ISDN trunks.
Valid
entries Usage
y/n
Valid entries Usage
10
to 1024 or
blank
Valid entries Usage
0
through 5 If this field is 0, the Conference Parties with Public Network
Trunks field will not appear on the screen.
Valid
entries Usage
0
through
255
Specifies the number of seconds that reset shift dial tone is
audible before busy tone is heard. Reset shift dial tone allows
the user to dial a new extension by dialing one new digit that
replaces the last digit of the extension previously dialed. The
new digit replaces the last digit of the extension previously
dialed.
Enter
0 to disable this feature.